Hollow Metal 5-3/4″ Standard* Frame
Wire Masonry Anchor
Masonry “T” Anchor
Existing Wall Anchor
Jamb Depth |
4-3/4” |
5-3/4” |
6-1/4” |
6-3/4” |
7-1/8” |
7-1/4” |
7-3/4” |
8-1/4” |
8-3/4” |
9-1/4” |
10-1/4” |
Throat Opening
| 3-7/8”
| 4-7/8” |
5-1/4” |
5-3/4” |
6-1/8” |
6-1/4” |
6-3/4” |
7-1/4” |
7-3/4” |
8-1/4” |
9-1/4” |
Includes:
• 16 gauge – primed galvanneal
• Reinforced for closer
• Prepped and reinforced for 3 – 4-1/2″ square corner hinges and 4-7/8″ ASA strike prep
• Fire-rated Warnock Hersey mylar fire labels
• Assembled welded or knock down
• Handed for le or right swing(must specify – inswing or outswing)
• Anchors (must specify)
• Prepped for 3 rubber silencers
• Will work with block walls, poured walls, metal studsor wood studs
Standard Application (Interior & Exterior Applications)
Hollow Metal Drywall** Frame
Anchor for Steel Stud Partition
Anchor for Wood Stud Partition
Jamb/Compression Anchor
Jamb Depth |
4-3/4” |
5-5/8” |
5-7/8” |
6-1/4” |
6-5/8” |
7-1/4” |
7-3/4” |
8-1/4” |
Throat Opening
| 3-3/4”
| 4-5/8” |
4-7/8” |
5-1/4” |
5-5/8” |
6-1/4” |
6-3/4” |
7-1/4” |
Includes:
• 16 gauge – cold rolled – primed galvanneal
• Prepped and reinforced for 3 – 4-1/2″ square corner hinges and 4-7/8″ ASA strike prep
• Fire-rated Warnock Hersey mylar fire labels
• Integral adjustable lumb anchor
• 4 tab interlocking system
• Knock down, ready to install
• Handed for le or right swing (must specify)
• Prepped for 3 rubber silencers
Other sizes and profiles available special order
** Drywall Frame – Interior applica on only
Drywall Application (Interior Applications Only)
Hardware for both Masonary and Drywall Frame
Hang the Door
Plain Bearing Hinge 4-1/2″ x 4-1/2″ MP79 26
Ball Bearing Hinge 4-1/2″ x 4-1/2″ MPB79 26D
NRP Ball Bearing Hinge 4-1/2″ x 4-1/2″ MPB79-NRP 26D MPB91-NRP 32D
Spring Hinge 4-1/2″ x 4-1/2″ MPS60 26D Spring Hinge
Secure the door with Lock, Flush Bolts, Panic Bars, etc
Key in Lever Cylindrical Lock
Augusta Design 626 Satin Chrome 4600LN Series
Grade 1 Cylindrical Lever Locksets
Augusta Design 626 Satin Chrome 4700LN Series
Passage
4601LN
4701LN
Both levers always active
Privacy
4602LN
4702LN
Outside lever locked by inside push button…
Storeroom
460SLN
470SLN
Outside lever always locked. Inside lever always active.
Entry
4607LN
4707LN
Outside lever locked by inside push button. Unlocked by turning inside lever or key in exterior. Inside lever always active. If button is pushed and turned 90, outside lever will remain locked.
Single Cylinder Deadbolt
D212
Key by Thumbturn
Standard Traffic Vertical Rod Exit Device
2110-36 – Non Rated
2110F-36 – Fire Rated
630 Satin Stainless Steel
Special order
Standard Traffic Rim Exit Device
2100-36 – Non Rated
12100F-36 – Fire Rated
630 Satin Stainless Steel
Heavy Traffic Rim Exit Device
6100-36 – Non Rated
6100F-36 – Fire Rated
689 Aluminum Painted
Lever with Escutcheon Exterior Exit Device Trim
AU426F LHR – Left Hand Reverse
AU426F RHR – Right Hand Reverse
630 Satin Stainless Steel
Special order
1109 x 6-Pin
626 Satin Chrome
Special order
Key In Lever Exterior Exit Device Trim
AU446F – Keyed
626 Satin Chrom
Mortise Lock
Augusta Design
626 Satin Chrome
8800FL Series
Entry/Office
AUR8807FL
For office doors where
locking is required. Latchbolt retracted by lever either side. Deadlocking latchbolt.
Storeroom
AUR8802FL
For use on storeroom, utility, exit doors. Latchbolt retracted by key outside, lever inside. Outside lever rigid at all times. Inside lever always active. Deadlocking latchbolt
Privacy/Bedroom or Bath Lock
AUR8847FL
Latchbolt retracted by knob/lever either side. Deadbolt operated by thumbturn inside. When deadbolt is projected, outside lever is automatically locked. Anti-panic operation.
Mortise Cylinder
2553 X 1-1/8″
626 Satin Chrome
“C” Keyway. Other keyways and cylinders available special order.
Control the Door with Closers – Grade 1
Standard Traffic Door Closer
1101BF – Non-Hold Open
1111BF – Hold Open
689 Aluminum Painted
5800 Series Door Closer
5801 – Non-Hold Open Tri-Packed
5811 – Hold Open Tri-Packed
689 Aluminum Painted
Heavy Traffic Door Closer
2701 – Non-Hold Open
2711 – Hold Open Includes Cover
689 Aluminum Painted
Parallel Arm Mount
Top Jamb Arm Mount
Regular Arm Mount
Closer includes hardware pack for regular arm, top jamb mounting, and parallel arm installation.