Smooth Narrow Profile 2 Block

Available sizes:
• 6’8″ Tall x 36″ wide
• 8’0″ Tall x 36″ wide
• 8’0″ Tall x 42″ wide

• 2 Block Left configuration
• Reeds Glass
• Metro 16″ stainless steel pull handle

Available options:
• Multipoint Lock Sets.
• Factory Pre-finished option: Black
• Available unfinished (white) or pre-finished
• Flush glazed with replaceable glass panels
• 4 glass panels in each door, available in 3 glass options
• 3” wide stiles and top rail, 10-1/2” bottom rail

Product Information

NP-Series fiberglass doors are available in 3 sizes, and as slabs or pre-hung in single and double door configurations with all composite components. Choose unfinished, or pre-finished in Black. These doors are flush-glazed (no raised moulding or insert frames) and are “stopped-in” on the interior side of the door with wood glass stop molding. Three glass options are shown below. With smooth fiberglass skin on both sides, these are Premium Series doors which feature a hardwood edge on both edges and a full-width composite top and bottom rail. All NP-Series doors have a solid Timberstrand® core — no foam, and can accept standard hardware including multipoint locks.

FiberCraft premium series doors have hardwood edges and composite top and bottom rails
• 3 door sizes available: 3’0” x 6’8”, 3’0” x 8’0”, 3’6” x 8’0”
• Three configurations available shown at right – each door configuration available in right or left hand
• 3” wide stiles and top rail – 10-1/2” inch bottom rail
• Smooth (no texture) fiberglass doors skins
• Solid Timberstrand door core – no foam – provides very strong door
• Three Insulated Glass Panels available for this door – in Clear, Reeds, or Cloud glass textures
• Use standard lock set hardware including multipoint locks.
• 6’ 8” 1 Block — block is 18-5/8” tall
• 6’ 8” 2 Block — block is 35-7/8” tall
• 8’ 1 Block — block is 22-5/8” tall
• 8’ 2 Block — block is 43-7/8” tall
• Door available pre-hung or as a slab
• Unfinished or with a factory finish in Black – Unfinished doors are white for painting by user
• Pre-hang configurations for single or double doors

Glass Texture Options

All-Composite Components

GlassCraft Premium Series and Pro Series Fiberglass Composite Doors in this catalog can be ordered as a pre-hung door unit. Configuration drawings and pricing for prehung doors are available via our online catalog. GlassCraft uses our exclusive allcomposite material in all FiberCraft pre-hung entryways. This WPC (wood polymer composite) material resists decay and rot, is impervious to weather, and will not crack or split like wood jamb legs. All jamb legs, headers, brick mold and sills utilize composite materials and no wood parts are used in the pre-hang components. Standard pre-hung units include 4-9/16” wide jamb legs, jamb header, adjustable threshold, weatherstripping, plus 3 ball-bearing hinges on 6’8” tall doors and 4 ballbearing hinges on 8’0” tall doors, brick mold, plus T-astragal (for double doors), and mull post and flush bolts (where needed and applicable). Pre-hung unit options include door sweep, brick mold, 6-9/16” wide jamb, Endura or ADA sills, StrikeJamb reinforcement, and door boring for hardware

Strikejamb

All FiberCraft pre-hung doors are available with a steel-reinforcement StrikeJamb™ as an option. Pre-hung units include jamb legs, T-astragal (for double doors), standard sill, header, weatherstripping, and adjustable threshold, plus 3 ball-bearing hinges on 6’8” tall doors and 4 ball-bearing hinges on 8’0” tall doors.

The StrikeJamb™ reinforcement can be installed on the lock side jamb leg for safety and security. This plate reinforces the jamb leg, and allows the dead bolt and the handleset bolt to throw so that the bolts extend through the corresponding holes in the steel reinforcement plates.

In addition, long mounting screws should be used with this StrikeJamb, these screws extending through the jamb leg, then through the steel plate, and finally into the wall studs. Image at right shows the reinforcing plate from the back jamb leg side. This metal plate is hidden from view after installation.

Sill and Sill Color Options

All standard pre-hung exterior door units use adjustable composite sills that help prevent water penetration, rotting, warping, and discoloration. Our standard adjustable composite sill includes a peel-off protection film which protects the sill during the house construction, and is made from 100% composite and aluminum materials. The “adjustable” feature allows the top of the sill to be adjusted with a screwdriver to match the correct height required for the bottom of the door. Optionally, you may select the Endura® Brand adjustable composite threshold or an ADA threshold. The ADA threshold is approved for use with wheelchairs. ADA sills are 5” x 1/2” or 7” x 1/2”. The Endura Z-Series Sill System (for an extra charge) provides a walnut colored sill cap, the adjustable feature, and a hard plastic protective construction cover.

Hinge Color Options

All pre-hung 6’-8” tall units use three 4-inch ball-bearing hinges, while 8’-0” tall units use four hinges. Choose from the three hinge color options shown at left for your pre-hung entry door unit: Oil Rubbed Bronze, Satin Nickel or Flat Black.


TOP