Product Codes
Sets with 1 1/2″ x 11″ Plates
- Keyed with American Cylinder: 11A1
- Non-Keyed Passage: 11A2
- Non-Keyed American Style Thumbturn Inside: 11A3
- Non-Keyed Fixed Handle Outside, Operating Handle Inside: 11A4
- Dummy Pair: 11A5
Sets with 2″ x 10″ Plates
- Keyed with American Cylinder: 11B1
- Non-Keyed Passage: 11B2
- Non-Keyed American Style Thumbturn Inside: 11B3
- Non-Keyed Fixed Handle Outside, Operating Handle Inside: 11B4
- Dummy Pair: 11B5
Handing required.
Key codes may be specified. Fit standard door thickness of 1 3⁄4”, specify if different.
Set includes Plates, Handles and Cylinders (where applicable).
Weiser®(WR5) Keyway: Specify by adding “W” to the beginning of Product Code. No upcharge for cylinder substitution. Can be keyed into existing Weiser® system
Available Finishes
Polished Brass (US3)
Oil Rubbed Bronze (US10B)
Satin Nickel (US15)
Flat Black (US19)
Polished Chrome (US26)
To determine your Multi-Point Lock configuration:
1) Identify the manufacturer of your patio door and multi-point lock
2) Measure center-to-center hole spacing between lever and the cylinder
3) Check the lever position, is it above or below the cylinder?
4) Identify the type of cylinder used in the door, is it American or Euro Profile Cylinder?
Door Manufacturers listed under each configuration are for reference only and are
subject to change. Some retro fitting may be necessary. Please carefully measure and
identify your hardware using the diagrams and steps below.
Configuration #1
American Cylinder Hub Below Handle 3 5/8″ Center to Center
ref. Atrium®, G-U®, KML by Andersen®, Andersen® Marvin Integrity®, Paddock Lockmaster™, Superior®
Configuration #2
American Cylinder Hub Above Handle 3 5/8″ Center to Center
ref. BiltBest®, G-U®, Hurd® (Energy Saver), Andersen®
Configuration #3
American Cylinder Hub Above Handle 4 1/8″ Center to Center
ref. Andersen®
Configuration #4
American Cylinder Hub Above Handle 3 5/8″ Center to Center
ref. Ashland®, Caradco®, JELD-WEN® Jeldwen® Custom Collection (formerly Pozzi®) Marvin®, PGT®, Premium Collection (formerly Norco®) Weathershield®
Configuration #5
Euro Profile Cylinder Below Handle 3 5/8″ Center to Center
ref. Crestline®, Hoppe®, Hurd®, KFV®, Kolbe & Kolbe® Lincoln®, Loewen®, Paddock Lockmaster™, Peachtree® Semco®, Sierra Pacific®, ignature®, Simpson® Therma-Tru®, Vetter®, Willmar®, Windsor® Weathershield®
Configuration #6
American Cylinder Hub Below Handle 3 5/8″ Center to Center
ref. Milgard®, Pell®
Configuration #7
American Cylinder Hub Above Handle 6″ Center to Center
ref. Trillenium® (formerly W&F Manufacturing)
